熔體流動速率測定儀 廠家
型 號
更新時間2024-11-19
廠商性質生產廠家
報價
產品概述
產品名稱：熔融指數試驗機，熔體流動速率測定儀
Product Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
1, extruding and discharging part
出料口直徑：Φ2.095±0.005毫米，出料口長度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
裝料筒直徑：Φ9.550±0.025毫米，裝料筒長度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞桿頭直徑：9.475±0.015毫米，活塞桿頭長度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、標準試驗負荷（共8級全304#不銹鋼砝碼）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、溫度范圍：常規室溫——400℃（500℃可選）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒溫精度：±0.5℃ 5、顯示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可選手動或自動切料7、溫度恢復時間：小于4分鐘
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打?。何⑿痛蛴C(jī)自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,
Product Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
1, extruding and discharging part
出料口直徑：Φ2.095±0.005毫米，出料口長度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
裝料筒直徑：Φ9.550±0.025毫米，裝料筒長度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞桿頭直徑：9.475±0.015毫米，活塞桿頭長度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、標準試驗負荷（共8級全304#不銹鋼砝碼）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、溫度范圍：常規室溫——400℃（500℃可選）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒溫精度：±0.5℃ 5、顯示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可選手動或自動切料7、溫度恢復時間：小于4分鐘
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打印：微型打印機自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,
Product Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
1, extruding and discharging part
出料口直徑：Φ2.095±0.005毫米，出料口長度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
裝料筒直徑：Φ9.550±0.025毫米，裝料筒長度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞桿頭直徑：9.475±0.015毫米，活塞桿頭長度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、標準試驗負荷（共8級全304#不銹鋼砝碼）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、溫度范圍：常規室溫——400℃（500℃可選）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒溫精度：±0.5℃ 5、顯示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可選手動或自動切料7、溫度恢復時間：小于4分鐘
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打?。何⑿痛蛴C(jī)自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,
Product Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
1, extruding and discharging part
出料口直徑：Φ2.095±0.005毫米，出料口長度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
裝料筒直徑：Φ9.550±0.025毫米，裝料筒長度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞桿頭直徑：9.475±0.015毫米，活塞桿頭長度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、標準試驗負荷（共8級全304#不銹鋼砝碼）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、溫度范圍：常規室溫——400℃（500℃可選）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒溫精度：±0.5℃ 5、顯示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可選手動或自動切料7、溫度恢復時間：小于4分鐘
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打印：微型打印機自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,
Product Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
1, extruding and discharging part
出料口直徑：Φ2.095±0.005毫米，出料口長度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
裝料筒直徑：Φ9.550±0.025毫米，裝料筒長度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞桿頭直徑：9.475±0.015毫米，活塞桿頭長度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、標準試驗負荷（共8級全304#不銹鋼砝碼）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、溫度范圍：常規室溫——400℃（500℃可選）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒溫精度：±0.5℃ 5、顯示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可選手動或自動切料7、溫度恢復時間：小于4分鐘
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打?。何⑿痛蛴C(jī)自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,
Product Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
1, extruding and discharging part
出料口直徑：Φ2.095±0.005毫米，出料口長度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
裝料筒直徑：Φ9.550±0.025毫米，裝料筒長度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞桿頭直徑：9.475±0.015毫米，活塞桿頭長度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、標準試驗負荷（共8級全304#不銹鋼砝碼）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、溫度范圍：常規室溫——400℃（500℃可選）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒溫精度：±0.5℃ 5、顯示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可選手動或自動切料7、溫度恢復時間：小于4分鐘
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打?。何⑿痛蛴C(jī)自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,
Product Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4, according to the national standards, the feeding after adding four minutes countdown function
5, the RS232 interface, can be directly connected to the computer output data （optional）
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,
Product Name: melt index tester, melt flow rate tester
Model: BRR
One, meet the standards:
ISO 1133, ASTM D1238, GB/T3682
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4, according to the national standards, the feeding after adding four minutes countdown function
5, the RS232 interface, can be directly connected to the computer output data （optional）
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,
Product Name: melt index tester, melt flow rate tester
Model: BRR
One, meet the standards:
ISO 1133, ASTM D1238, GB/T3682
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4, according to the national standards, the feeding after adding four minutes countdown function
5, the RS232 interface, can be directly connected to the computer output data （optional）
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,
Product Name: melt index tester, melt flow rate tester
Model: BRR
One, meet the standards:
ISO 1133, ASTM D1238, GB/T3682
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4, according to the national standards, the feeding after adding four minutes countdown function
5, the RS232 interface, can be directly connected to the computer output data （optional）
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,
Product Name: melt index tester, melt flow rate tester
Model: BRR
One, meet the standards:
ISO 1133, ASTM D1238, GB/T3682
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4, according to the national standards, the feeding after adding four minutes countdown function
5, the RS232 interface, can be directly connected to the computer output data （optional）
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,
Product Name: melt index tester, melt flow rate tester
Model: BRR
One, meet the standards:
ISO 1133, ASTM D1238, GB/T3682
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4, according to the national standards, the feeding after adding four minutes countdown function
5, the RS232 interface, can be directly connected to the computer output data （optional）
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,
Product Name: melt index tester, melt flow rate tester
Model: BRR
One, meet the standards:
ISO 1133, ASTM D1238, GB/T3682
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打?。何⑿痛蛴C(jī)自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,
Product Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
Product Name: melt index tester, melt flow rate tester
Model: BRR
One, meet the standards:
ISO 1133, ASTM D1238, GB/T3682
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4, according to the national standards, the feeding after adding four minutes countdown function
5, the RS232 interface, can be directly connected to the computer output data （optional）
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
Model: BRR
One, meet the standards:
ISO 1133, ASTM D1238, GB/T3682
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4, according to the national standards, the feeding after adding four minutes countdown function
5, the RS232 interface, can be directly connected to the computer output data （optional）
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
Model: BRR
One, meet the standards:
ISO 1133, ASTM D1238, GB/T3682
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4, according to the national standards, the feeding after adding four minutes countdown function
5, the RS232 interface, can be directly connected to the computer output data （optional）
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
Model: BRR
One, meet the standards:
ISO 1133, ASTM D1238, GB/T3682
Two, product description:
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
Three, product characteristics:
1, fast heating speed, overshoot is small, high precision constant temperature 2
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5, can use manual, automatic cutting test method 6, Chinese LCD display
7, equipped with a printer, the results of the test automatically print output
Four, the main technical parameters
1, extruding and discharging part
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
Five, accessories
The sequence number name a number of notes
1, weight 1 meter 8 （1# at 1 level load）
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2, weight tray 1 at 1 load
3, hoppers 14, die cleaning rod 1
5, charging 16 rods, cylinder cleaning rod 1 assembly
7, the rod of 1 （at 1 load）
8, die 19, level 1
10, gauze volume 211, Volume 2 printing paper
Six, characteristics of the instrument:
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4, according to the national standards, the feeding after adding four minutes countdown function
5, the RS232 interface, can be directly connected to the computer output data （optional）
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8, long time test of strong corrosive plastic aProduct Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
1, extruding and discharging part
出料口直徑：Φ2.095±0.005毫米，出料口長度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
裝料筒直徑：Φ9.550±0.025毫米，裝料筒長度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞桿頭直徑：9.475±0.015毫米，活塞桿頭長度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、標準試驗負荷（共8級全304#不銹鋼砝碼）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、溫度范圍：常規室溫——400℃（500℃可選）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒溫精度：±0.5℃ 5、顯示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可選手動或自動切料7、溫度恢復時間：小于4分鐘
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打?。何⑿痛蛴C(jī)自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
1, extruding and discharging part
出料口直徑：Φ2.095±0.005毫米，出料口長度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
裝料筒直徑：Φ9.550±0.025毫米，裝料筒長度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞桿頭直徑：9.475±0.015毫米，活塞桿頭長度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、標準試驗負荷（共8級全304#不銹鋼砝碼）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、溫度范圍：常規室溫——400℃（500℃可選）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒溫精度：±0.5℃ 5、顯示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可選手動或自動切料7、溫度恢復時間：小于4分鐘
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打?。何⑿痛蛴C(jī)自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
1, extruding and discharging part
出料口直徑：Φ2.095±0.005毫米，出料口長度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
裝料筒直徑：Φ9.550±0.025毫米，裝料筒長度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞桿頭直徑：9.475±0.015毫米，活塞桿頭長度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、標準試驗負荷（共8級全304#不銹鋼砝碼）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、溫度范圍：常規室溫——400℃（500℃可選）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒溫精度：±0.5℃ 5、顯示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可選手動或自動切料7、溫度恢復時間：小于4分鐘
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打印：微型打印機自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
1, extruding and discharging part
出料口直徑：Φ2.095±0.005毫米，出料口長度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
裝料筒直徑：Φ9.550±0.025毫米，裝料筒長度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞桿頭直徑：9.475±0.015毫米，活塞桿頭長度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、標準試驗負荷（共8級全304#不銹鋼砝碼）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、溫度范圍：常規室溫——400℃（500℃可選）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒溫精度：±0.5℃ 5、顯示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可選手動或自動切料7、溫度恢復時間：小于4分鐘
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打?。何⑿痛蛴C(jī)自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
1, extruding and discharging part
出料口直徑：Φ2.095±0.005毫米，出料口長度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
裝料筒直徑：Φ9.550±0.025毫米，裝料筒長度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞桿頭直徑：9.475±0.015毫米，活塞桿頭長度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、標準試驗負荷（共8級全304#不銹鋼砝碼）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、溫度范圍：常規室溫——400℃（500℃可選）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒溫精度：±0.5℃ 5、顯示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可選手動或自動切料7、溫度恢復時間：小于4分鐘
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打?。何⑿痛蛴C(jī)自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,ndProduct Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
1, extruding and discharging part
出料口直徑：Φ2.095±0.005毫米，出料口長度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
裝料筒直徑：Φ9.550±0.025毫米，裝料筒長度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞桿頭直徑：9.475±0.015毫米，活塞桿頭長度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、標準試驗負荷（共8級全304#不銹鋼砝碼）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、溫度范圍：常規室溫——400℃（500℃可選）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒溫精度：±0.5℃ 5、顯示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可選手動或自動切料7、溫度恢復時間：小于4分鐘
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打?。何⑿痛蛴C(jī)自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
1, extruding and discharging part
出料口直徑：Φ2.095±0.005毫米，出料口長度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
裝料筒直徑：Φ9.550±0.025毫米，裝料筒長度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞桿頭直徑：9.475±0.015毫米，活塞桿頭長度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、標準試驗負荷（共8級全304#不銹鋼砝碼）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、溫度范圍：常規室溫——400℃（500℃可選）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒溫精度：±0.5℃ 5、顯示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可選手動或自動切料7、溫度恢復時間：小于4分鐘
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打印：微型打印機自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
1, extruding and discharging part
出料口直徑：Φ2.095±0.005毫米，出料口長度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
裝料筒直徑：Φ9.550±0.025毫米，裝料筒長度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞桿頭直徑：9.475±0.015毫米，活塞桿頭長度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、標準試驗負荷（共8級全304#不銹鋼砝碼）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、溫度范圍：常規室溫——400℃（500℃可選）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒溫精度：±0.5℃ 5、顯示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可選手動或自動切料7、溫度恢復時間：小于4分鐘
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打?。何⑿痛蛴C(jī)自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
1, extruding and discharging part
出料口直徑：Φ2.095±0.005毫米，出料口長度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
裝料筒直徑：Φ9.550±0.025毫米，裝料筒長度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞桿頭直徑：9.475±0.015毫米，活塞桿頭長度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、標準試驗負荷（共8級全304#不銹鋼砝碼）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、溫度范圍：常規室溫——400℃（500℃可選）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒溫精度：±0.5℃ 5、顯示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可選手動或自動切料7、溫度恢復時間：小于4分鐘
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打?。何⑿痛蛴C(jī)自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
1, extruding and discharging part
出料口直徑：Φ2.095±0.005毫米，出料口長度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
裝料筒直徑：Φ9.550±0.025毫米，裝料筒長度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞桿頭直徑：9.475±0.015毫米，活塞桿頭長度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、標準試驗負荷（共8級全304#不銹鋼砝碼）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、溫度范圍：常規室溫——400℃（500℃可選）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒溫精度：±0.5℃ 5、顯示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可選手動或自動切料7、溫度恢復時間：小于4分鐘
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打印：微型打印機自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
1, extruding and discharging part
出料口直徑：Φ2.095±0.005毫米，出料口長度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
裝料筒直徑：Φ9.550±0.025毫米，裝料筒長度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞桿頭直徑：9.475±0.015毫米，活塞桿頭長度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、標準試驗負荷（共8級全304#不銹鋼砝碼）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、溫度范圍：常規室溫——400℃（500℃可選）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒溫精度：±0.5℃ 5、顯示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可選手動或自動切料7、溫度恢復時間：小于4分鐘
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打印：微型打印機自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
1, extruding and discharging part
出料口直徑：Φ2.095±0.005毫米，出料口長度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
裝料筒直徑：Φ9.550±0.025毫米，裝料筒長度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞桿頭直徑：9.475±0.015毫米，活塞桿頭長度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、標準試驗負荷（共8級全304#不銹鋼砝碼）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、溫度范圍：常規室溫——400℃（500℃可選）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒溫精度：±0.5℃ 5、顯示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可選手動或自動切料7、溫度恢復時間：小于4分鐘
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打?。何⑿痛蛴C(jī)自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
1, extruding and discharging part
出料口直徑：Φ2.095±0.005毫米，出料口長度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
裝料筒直徑：Φ9.550±0.025毫米，裝料筒長度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞桿頭直徑：9.475±0.015毫米，活塞桿頭長度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、標準試驗負荷（共8級全304#不銹鋼砝碼）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、溫度范圍：常規室溫——400℃（500℃可選）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒溫精度：±0.5℃ 5、顯示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可選手動或自動切料7、溫度恢復時間：小于4分鐘
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打印：微型打印機自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
1, extruding and discharging part
出料口直徑：Φ2.095±0.005毫米，出料口長度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
裝料筒直徑：Φ9.550±0.025毫米，裝料筒長度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞桿頭直徑：9.475±0.015毫米，活塞桿頭長度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、標準試驗負荷（共8級全304#不銹鋼砝碼）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、溫度范圍：常規室溫——400℃（500℃可選）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒溫精度：±0.5℃ 5、顯示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可選手動或自動切料7、溫度恢復時間：小于4分鐘
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打印：微型打印機自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
1, extruding and discharging part
出料口直徑：Φ2.095±0.005毫米，出料口長度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
裝料筒直徑：Φ9.550±0.025毫米，裝料筒長度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞桿頭直徑：9.475±0.015毫米，活塞桿頭長度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、標準試驗負荷（共8級全304#不銹鋼砝碼）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、溫度范圍：常規室溫——400℃（500℃可選）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒溫精度：±0.5℃ 5、顯示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可選手動或自動切料7、溫度恢復時間：小于4分鐘
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打印：微型打印機自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
1, extruding and discharging part
出料口直徑：Φ2.095±0.005毫米，出料口長度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
裝料筒直徑：Φ9.550±0.025毫米，裝料筒長度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞桿頭直徑：9.475±0.015毫米，活塞桿頭長度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、標準試驗負荷（共8級全304#不銹鋼砝碼）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、溫度范圍：常規室溫——400℃（500℃可選）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒溫精度：±0.5℃ 5、顯示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可選手動或自動切料7、溫度恢復時間：小于4分鐘
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打印：微型打印機自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
1, extruding and discharging part
出料口直徑：Φ2.095±0.005毫米，出料口長度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
裝料筒直徑：Φ9.550±0.025毫米，裝料筒長度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞桿頭直徑：9.475±0.015毫米，活塞桿頭長度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、標準試驗負荷（共8級全304#不銹鋼砝碼）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、溫度范圍：常規室溫——400℃（500℃可選）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒溫精度：±0.5℃ 5、顯示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可選手動或自動切料7、溫度恢復時間：小于4分鐘
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打?。何⑿痛蛴C(jī)自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester
型號： BRR
Model: BRR
一、滿足標準：
One, meet the standards:
ISO 1133,ASTM D1238,GB/T3682
ISO 1133, ASTM D1238, GB/T3682
二、產品說明：
Two, product description:
此款熔融指數試驗機為改良款，增加了眾多功能，在儀器配置、儀器使用壽命、操作便利性、測試精度方面有大幅提高，
The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,
具有國內一般熔融指數試驗機所*的優勢和性價比。
With the domestic general melt index test machine there is nothing comparable to this advantage and price.
三、產品特點：
Three, product characteristics:
1、升溫速度快，超調量極小 2、恒溫精度高
1, fast heating speed, overshoot is small, high precision constant temperature 2
3、在填料之后，能迅速恢復恒溫狀態 4、試驗參數校準并修正方便
3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience
5、可采用手動、自動切料試驗方法 6、中文液晶顯示
5, can use manual, automatic cutting test method 6, Chinese LCD display
7、配有打印機，將測試結果自動打印輸出
7, equipped with a printer, the results of the test automatically print output
四、主要技術參數
Four, the main technical parameters
1、擠壓出料部分
1, extruding and discharging part
出料口直徑：Φ2.095±0.005毫米，出料口長度：8.000±0.025毫米
The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm
裝料筒直徑：Φ9.550±0.025毫米，裝料筒長度：152± 0.1毫米
The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm
活塞桿頭直徑：9.475±0.015毫米，活塞桿頭長度：6.350±0.100毫米
Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm
2、標準試驗負荷（共8級全304#不銹鋼砝碼）
Test load of 2, standard （a total of 8 grade 304# stainless steel weight）
3、溫度范圍：常規室溫——400℃（500℃可選）
3, the temperature range: conventional room temperature -- 400 ℃ （500 ℃ optional）
4、恒溫精度：±0.5℃ 5、顯示分辨率：0.1℃
4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5
6、切料方式：可選手動或自動切料7、溫度恢復時間：小于4分鐘
The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes
8、打印：微型打印機自動打印輸出 9、電源電壓：AC220V±10% 50HZ
8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ
五、配件
Five, accessories
序 號 名 稱 單 位 數 量 備注
The sequence number name a number of notes
1、 砝碼 套 1 計8件（1#在1級負荷內）
1, weight 1 meter 8 （1# at 1 level load）
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G
2、 砝碼托盤 件 1 在1級負荷內
2, weight tray 1 at 1 load
3、 裝料斗 件 1 4、 口模清理棒 件 1
3, hoppers 14, die cleaning rod 1
5、 裝料桿 件 1 6、 料筒清理桿 件 1 組合件
5, charging 16 rods, cylinder cleaning rod 1 assembly
7、 活塞桿 件 1 （在1級負荷內）
7, the rod of 1 （at 1 load）
8、 口模 件 1 9、 水準儀 件 1
8, die 19, level 1
10、紗布 卷 2 11、 打印紙 卷 2
10, gauze volume 211, Volume 2 printing paper
六、儀器特點：
Six, characteristics of the instrument:
1、全套砝碼采用304不銹鋼材料制作，防止生銹影響外觀及砝碼精度
1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision
2、加熱筒采用304不銹鋼制作，因熔融指數試驗機長期在高溫下工作（zui高可達400~500度），高溫下金屬材料極易氧化生銹
2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long time （up to 400~500）, high temperature metal materials are easy to rust
3、雙傳感器配置，控溫精確，溫度梯度更好，壽命更長
3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life
4、按國標要求，加料后增加四分鐘倒計時功能
4, according to the national standards, the feeding after adding four minutes countdown function
5、RS232接口，可直接連接電腦輸出數據（選配）
5, the RS232 interface, can be directly connected to the computer output data （optional）
6、開機后可直接顯示上次測試條件，避免每次用戶都重新設置試驗參數，減少操作人員工作量
6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators
7、zui高溫度可達450~500度（訂貨時需特殊說明）
7, the highest temperature can reach 450~500 degrees （when ordering special instructions）
8、可長時間測試強腐蝕性塑料而無損儀器精度、
8, long time test of strong corrosive plastic and nondestructive instrument accuracy,nondestructive instrument accuracy,
- 上一個： 熱變形維卡軟化點溫度測定儀 廠家
- 下一個： GDAT-S20Hz介電常數測定儀
